What is Bootloop and how to fix it?

When your computer or smartphone continues to restart, you’re stuck in an endless boot loop. So what is a bootloop and how to fix it?

We probably use computers and smartphones almost every day. And most of the time, our computers and smartphones work flawlessly.

Sure, the devices will become slow over time and start losing battery life faster, but for the most part, it takes a long time. However, some technical issues, such as bootloop, often signal the end of your device’s life, or at least a critical error.

But what is a bootloop? How did the device go from being good to being locked in a bootloop? And can we fix it?

What is Bootloop?

In the simplest explanation, bootloop is a condition in which a computer or smartphone is locked in a restart that keeps repeating itself. The term “boot loop” is just a more general way of saying “reboot loop”.

When you restart your computer or smartphone, they both have a number of tasks to complete in order to get up and running. So all you see on your smartphone screen is just your mobile phone provider’s logo or your mobile phone’s logo. The same goes for computers.

In other cases, the device completes all required tasks, everything starts properly, and the device works smoothly. But sometimes there is a critical error in the activation process that causes the phone to freeze.

Consider this simple method. If there is no clear indication of what is wrong, usually restart your device, and the problem is usually solved with this simple restart.

When your device is locked in a power loop, this is how your device tries to “turn it off and on again” to fix the problem. But, of course, due to the problems in the startup process, it will continue to receive the same error again and again. But what exactly is the cause of the bootloop?

What causes Bootloop?

There are several different reasons why a boot loop might occur, but all of them usually involve some sort of system change before the restart cycle.

Most of the problems are related to software, faulty system updates, new drivers or programs that do not connect or malware that enters the device between restart cycles.

Read also: 5 ways to protect your smartphones from viruses

But sometimes a startup loop may start due to an underlying hardware issue with your smartphone or computer. You may think that the latest firmware update is the cause of all these issues, but it may be due to the fact that Your device hardware is severely damaged without your knowledge. And because there is no system update to force your smartphone to restart, the issue remains undetected.

Is it possible to fix Bootloop?

Whether the bootloop is repairable or not depends a lot on what caused your device to enter the bootloop.

If the bootloop is turned on due to a hardware failure, it is often fatal to your smartphone or computer. On the other hand, if the bootloop started due to a recent firmware update, it can usually be fixed.

How to Overcome Bootloop in Windows

How to Overcome Bootloop in Windows

With Windows, the frequent startup loop can be fixed with automatic repairs using Microsoft’s auto-repair feature. However, if this does not work, you will need to do the repair manually.

You can try a hard reboot first (make sure all peripherals are disconnected from your computer), which means that you hold down the system power button for about five seconds, wait 30 seconds, and then press the power button to restart the computer. It should start normally now, but if it doesn’t, you’ll need to go into safe Windows mode to fix it.

If your Windows computer doesn’t start normally, here’s how to enter safe mode:

  • After the device is completely turned off, press the power button to turn it on.
  • As soon as you see something appear on the screen (usually the Windows logo or the manufacturer’s logo), press and hold the power button for about ten seconds to turn off the device.
  • Repeat this process twice more until you turn the device off and on three times.
  • For the fourth time, turn on the computer and you’ll see the words “Preparing for automatic repair”At the bottom of the screen. Let the device go through this process, and you’ll finally see a screen titled “Choose an option„.
  • From here, select Troubleshootthen Advanced options.

You can use any of these options to help your computer start properly, but the most common options for novice users are System restoration. This will restore your device to a previously recorded point on your computer and hopefully restore Windows.

How To Overcome Bootloop On Android Phones

How To Overcome Bootloop On Android Phones

Repairing a bootloop on a smartphone is more difficult than a computer, but that doesn’t mean it’s impossible to fix.

Of course, you can try to turn it off for a long time, such as 30 minutes or an hour, and then restart it. But if the phone still does not turn on as usual, you should start troubleshooting.

First, try to force your phone into Recovery mode by holding down the power button and the volume down button at the same time. From here, you may be able to restore your phone or restore a previous backup. However, this often leads to data loss, which is not ideal, so you may need to weigh your options.

If this doesn’t work, you need to enter the safe mode of your smartphone. When the phone turns on and you see the manufacturer’s name appear, press and hold the volume down button to put the device in Safe mode. Here, you can follow the instructions to remove any programs, applications, or software updates that force your phone to start.

How To Overcome Bootloop On Your HP iPhone

How To Overcome Bootloop On Your HP iPhone

The first iPhone debugging option is to force a reboot.

  • To force a restart on newer iPhone phones, quickly press the volume up button, then press the volume down button, then press and hold the power button.
  • To force a restart on older iPhone phones, press and hold the volume down and sleep / wake buttons simultaneously until you see the Apple logo.

If this doesn’t work, you can also try to restore your iPhone using a previous backup from iTunes. Note that this method will overwrite existing device data with any data stored in the backup.

You need to connect your phone to your computer, open iTunes, and click the device icon to open the iPhone information. From here, you’ll see an option that says Restore backup.

With iTunes on your computer, you can also check for a new iPhone software update. Sometimes the latest software updates will include bug fixes that will hopefully fix any issues that cause your iPhone to start.


So what is a bootloop? In essence, Bootloop is a condition in which the smartphone fails to enter the system and stops processing. This condition is usually marked by a smartphone that only displays the smartphone manufacturer’s logo.

The appearance of a bootloop on a smartphone or computer is something that many people hate. Your device may be able to resolve minor issues on its own, but when a major error occurs in the system, it will go into shock and display a startup loop.

Fortunately, it can sometimes be fixed. And with the rise of the internet today, there is a lot of useful information everywhere on how to fix your bootloop and many other errors that you may encounter on your smartphone or laptop.

So many articles What is a bootloop and how to fix it. Looking forward to more interesting articles and don’t forget to share this article with your friends. Thank you…

Leave a Comment

/* */