8 How to Fix System Restore not completed successfully Windows

Windows System Restore usually fixes errors, but sometimes finds them on its own. In this post, the administrator will discuss how to resolve that the system restore was not completed successfully.

You can always rely on the Windows Restore tool when you want to restore your device to an earlier state. This tool helps you undo recent changes to Windows devices and send them “back to front” when they work properly.

But while using this tool, you may encounter the error “System Restore Not Completed Successfully”. What causes this problem and how to fix it? Let’s explore how to resolve that the system restore was not completed successfully on Windows.

Read also: 2 Cara Mengatasi The file is too large for the destination file system

The restoration of the Cara Mengatasi system has not been completed successfully

1. Choose a different restore point

Restoration points often run into problems and become corrupt or corrupt. So, one of the easiest solutions to this problem is to choose another restore point. If you set up a daily system restore point, returning to another restore point should not cause major data loss.

Here are the steps on how to choose another restore point:

Choose another restore point
  1. Type Create a restore point in the search bar on the Start menu and select The best match.
  2. Navigate to the tab System protection and then press the button System restoration. Click Next continue.
  3. Select the most recent restore point from the list and click Next continue. From there, follow the on-screen instructions to complete the process.

2. Configure the system protection settings

Restore points may fail if the System Protection setting is disabled. So you can easily solve this problem by changing the system protection settings.

Configure system protection settings
  1. To get started, type Create a restore point in the search bar on the Start menu and select The best match.
  2. Navigate to the tab System protection and click the button Set.
  3. Then select the option Enable system protection. From there, click apply then press Good.
  4. Restart the device to apply these settings.

3. Run the system restore tool in safe mode

In other cases, you can resolve this issue by running System Restore Tool in safe mode. Here’s how:

Run the system restore tool in safe mode
  1. the press Win + R to open the Run command dialog box.
  2. Type msconfig and press enter to open the System Configuration window.
  3. Navigate to the tab Boot then check the option Safe boot.
  4. the press apply then press Good to implement this change.
  5. Restart your computer to boot safely.

Then select the restore point by following these steps:

  1. the press Win + R to open the Run command dialog box.
  2. Type sysdm.cpl then press enter to open the System Properties window.
  3. Navigate to the tab System protection and click on options System restoration. Click Next continue.
  4. Select the most recent restore point and click Next. Finally, follow the on-screen instructions, then restart your device.

4. Enable System Restore Services

The “System Restore Unsuccessful” error sometimes occurs when Restore Services is disabled. To resolve this issue, enable System Restore Services in the following steps:

Enable System Restore Services
  1. the press Win + R to open the Run command dialog box.
  2. Type services.msc and press enter to open the Services window.
  3. Find Microsoft Software Easy Copy Provider Service then double-click it.
  4. Then click the drop-down menu Startup type and select an option Automatic.
  5. Click the button start under options Status of services. Finally, press apply then press K to implement this change.
  6. Once done, apply the same activation steps Volume Shadow Copy Service.

5. Activate the System Restore Tool through the Local Group Policy Editor

The System Restore Did Not Complete error message Successfully appears often because the System Restore tool is disabled. To resolve this issue, activate the tool through the Local Group Policy Editor by following these steps:

Activate the System Restore Tool through the Local Group Policy Editor
  1. the press Win + R to open the Run command dialog box.
  2. Type gpedit.msc and press enter to open the Local Group Policy Editor.
  3. Navigate to Computer setup> Administrative templates> System> System restore.tem.
  4. Find and double-click the option Disable the System Restore setting in the right pane.
  5. Then select Configured or Off in the pop-up window. Finally, press applythe press Kthen restart the device.

6. Activate the System Restore Tool through Registry Editor

The registry editor also helps you to activate the system restore tool. Here’s how to activate the System Restore tool through Registry Editor:

Activate the system restore tool through the registry editor
  1. the press Win + R to open the Run command dialog box.
  2. Type regedit and press enter to open the Registry Editor.
  3. Navigate to HKEY_LOCAL_MACHINE> SOFTWARE> Politics> Microsoft> Windows NT> SystemRestore.

Click the button System restoration and find the value DisableConfig and Disable SR in the right pane. From there, follow these steps:

  1. Double-click value DisableConfig and set Value data ke 0 (zero). Click Good continue.
  2. Then double-click the value Disable SR and set Value data ke 0 (zero). Finally, click Khang up Registry Editorand restart the device to apply these changes.

If the Registry Editor is having problems, reset the tool to its default settings to avoid further problems.

Read also: What is the Windows Registry and how to edit it

7. Temporarily disable Windows Defender

In some rare cases, Windows Defender tends to interfere with the system restore tool. So you can temporarily disable Windows Defender to resolve this issue.

Temporarily disable Windows Defender Firewall
  1. To get started, type Control panel in the search bar on the Start menu and select The best match.
  2. Then click the drop-down menu Seen by and select Small icons.
  3. Select Windows Defender Firewall of menu items.
  4. Click on the option Turn Windows Defender Firewall on or off on the left side of.
  5. In the next window, select an option Disable Windows Firewall. the press Good to implement this change.

Now try running the System Restore tool and see if it works. If the problem persists, try temporarily disabling the third-party antivirus program on your device. When you have finished running the System Restore tool, be sure to re-enable Windows Defender and the antivirus program.

8. Try Clean Boot Option

The problems encountered are sometimes caused by corrupt or corrupt third-party applications. To check this, you need to make a clean start. If the clean boot option resolves the issue, then there is a third-party application that is interfering with the system restore tool.

To get rid of this issue completely, you can update or remove any suspicious third-party applications. And if you want to safely remove suspicious programs, use a trusted third-party uninstaller. This approach will remove any unwanted data that may remain and cause other system problems.

Conclusion

So this is how to restore a system that has not been successfully completed. System Restore Tool is a useful feature that you can rely on whenever you encounter various system issues. However, this tool often fails and does not work as expected. If the tool displays the error “System Restore Not Completed Successfully”, just apply one of the fixes that the administrator discussed earlier.


So many articles 8 Cara Mengatasi System Restore not completed successfully Windows. Looking forward to more interesting articles and don’t forget to share this article with your friends. Thank you…

Leave a Comment

/* */