If you receive an error message “Windows has detected a hard drive problem“Don’t worry and don’t immediately think about buying a new hard drive, as it may not be a hardware issue.
“Windows has detected a hard drive problem” error is quite common among Windows users. Although this error does not specify what the problem is, the error message itself says that you should contact the manufacturer for a possible repair or replacement.
Read also: 8 ways to repair unread external hard drive
Although it may sound bad, it’s not always a big deal, because software problems can cause problems. Therefore, before you decide to visit the store where you purchased your hard drive, you should always troubleshoot the software first. The administrator has compiled a list of fixes that you can try to fix. Windows has detected a hard drive problem.
Before you begin, first back up your files!
The process of troubleshooting storage devices can be risky. Anything can go wrong at any time, and your valuable data can be lost without a trace. To avoid this risk, consider backing up all files and documents.
You can back up all your files on your computer using an external storage device, subscribe to a backup service, or transfer data to the cloud.
Unless you have a lot of data that requires premium cloud storage, you don’t have to pay for cloud backups, so we recommend that you back up your Windows computer to the cloud. Once the backup is done, you can start troubleshooting quietly.
Read also: Why the size of the hard drive does not match the original
How to fix Windows has detected a hard drive problem
1. Uninstall recently installed applications and programs
Your computer may behave abnormally due to the presence of third-party applications and software. It is more likely to happen when you download it from an unknown source. So before you move on to operating system-level troubleshooting, remove any recently installed applications and programs. You can start with the newest one when you start experiencing this error. If placing the app in the Recycle Bin doesn’t help and the error persists, delete the app completely.
2. Run the SFC Scan
SFC scanning is a useful feature that Windows provides to scan and repair corrupt operating system files. Therefore, this is the scan that you should run to exclude the corrupted files as the cause of this problem. To run an SFC scan, follow the steps below:
- Type “cmd”From the Windows search bar.
- Right-click the Windows application Prompt order and select Running as administrator.
- Type “SFC / scannow“And press enter.
After the scan is complete, the tool will provide information about the results of identifying and fixing problems or tell you to do it yourself. Follow the on-screen scanning instructions and you should understand correctly. If the scan fails, perform a CHKDSK check.
3. Run a CHKDSK inspection
CHKDSK is a feature similar to SFC, this tool fixes file system errors and hard drive problems. Of all the remedies covered in this article, this fix has the best chance of fixing the error. To run the check correctly, you must run three separate commands on the command line.
You can start by typing “cmd”In the Windows search bar. Then right-click the Windows Command Prompt application and select Running as administrator. Then type “CHKDSK“And press enter to initiate the process of identifying possible issues. Remember that this command will not solve any problem with your hard drive, it will only notify you if it exists.
If CHKDSK provides a clean result, you can proceed to the next step. If you encounter a problem with your hard disk drive, run the following two commands on the command line in the same way as before.
- chkdsk / f: This command performs a thorough check and fixes any errors found along the way.
- chkdsk / r: This command tries to fix the bad sectors that may be the main cause of the error in question.
If none of the three checks work, continue to apply the following fix.
4. Run a malware scan
Viruses hidden in your computer can also be the reason why Windows reports hard drive errors. Therefore, the next step is to run a malware scan and eliminate the possibility of hidden malware causing damage. You can run a scan with a trusted antivirus to remove malware. If you don’t have an antivirus installed, you can use the default Windows application, Windows Defender.
5. Restore the system restore point
Restoring Windows to a restore point is the best way to resolve issues that cannot be resolved by normal means. As it restores your entire system, it also restores all settings. This eliminates the possibility of settings changes that could cause such problems. To return to a restore point, follow the steps below:
- Search for “Create a restore point” from the Windows search bar.
- Navigate to the tab System protection under the System properties.
- Click the button System restoration.
- Select the restore point you want to restore and click Next.
After that, follow the on-screen instructions to restore your computer to its original state. After restoring your computer, make sure the error is still there. If you answered yes, the problem is probably not in the hardware and OS.
6. Check the hardware status
To confirm that the hardware is causing this issue, you need to dig a little deeper. So disconnect your hard drive from your computer and connect it to another computer to see if you get the same error. If other computers start to show the same error, it confirms that you need to replace the hard disk.
You should also pay attention to the signs that your hard drive may be damaged soon. Some of these signs include slow or frozen computer, repeated bad sectors, and strange noises coming from the hard drive. If you encounter such signs and the error is discussed, it is best to have your computer or laptop checked by a technician if you cannot handle it yourself.
So here are some ways in which Windows has detected a hard drive problem. We hope the above methods can help you identify and fix your problem. If none of the fixes work, follow the error messages provided.
Also, if you decide to buy a new hard drive, compare different models according to different factors to choose the most suitable one. Choose the right type, size, specifications, performance, and most importantly, find the right balance between price and features.
So many articles 6 Ways to Fix Windows Detected Hard Drive Problem. Looking forward to more interesting articles and don’t forget to share this article with your friends. Thank you…
Hi, I am Azara! At Azara Tech we are passionate about tech and love sharing our knowledge and research with you.
At Azara Tech, we strive to be the ultimate resource for learning everything about technology!