3 Ways to Check SSD Speed ​​on a Laptop or PC

Does your computer still feel slow even after using an SSD? It’s time to check the speed of the SSD to see how well it works. In this post, the administrator will show you how to check the SSD speed.

If your computer is running slow while you’re using it, chances are you’ll need a few minor upgrades. Low performance computers are most often caused by low disk speeds, high memory usage, or lack of cooling. But how can we solve this problem without replacing everything?

In this guide, we’ll show you ways to test your SSD or hard drive speed, which will help you determine if your slow disk speed is slowing down your computer.

1. Check the SSD speed with the default applications

Hardware performance testing is relatively easy on most operating systems. Fortunately, on some operating systems, we can test the hardware without having to download additional software. Third-party applications will display read and write speeds at the same time, but you’ll need to figure it out manually in this method.

Windows

On Windows, SSD speed testing can be done through the command line. It is important that you run this as an administrator to prevent potential problems.

Check SSD speed in Windows without programs
  1. Type CMD in the search bar on the Start menu, then right-click on the most appropriate option and select Running as administrator.
  2. Now type the following command: “winsat disk -ran -write -drive (nama_drive): ”.

Brackets will not be part of the command and “(Name)”Will be replaced with your unit, usually“ C ”. Usually, users will only have a primary HDD or SSD, although many use an additional drive for storage. The disc name can be found by browsing This PC and can be found through the search bar, similar to the previous step.

Read also: 5 Ways to Optimize a Slow SSD in Windows 10

Linux

Linux users can also test the hardware through the built-in software. Here’s how to check your SSD on Linux:

Check SSD speed on Linux without programs
  1. First, you need to navigate to the terminal and open it.
  2. Once opened, type the following code in quotation marks: $ “timing; dd if = / dev / zero of = tempfile bs = 1M count = 1024; timingThe number displayed will be the “write” speed of the tested storage device.
  3. Because the administrator created a temporary file, the data is cached, producing distorted results when you try to test the read speed. If we run the same command, we will get distorted results. So you need to clear the cache from temporary files using the following command: $ “sudo / sbin / sysctl -w vm.drop_caches = 3„.
  4. After that, you can type this command to see the “read” speed of your SSD, as shown in the yellow box in the first image above: $ “dd if = tempfile of = / dev / null bs = 1M count = 1024 ″.
Check SSD speed in Linux without programs-2

macOS

Finally, if you have a Mac and many of us have one, we don’t have a built-in feature to view hardware specifications on a Mac. Apple has always been attentive to what’s under the shiny aluminum body and it’s no different from the software side. Fortunately, there are still ways to show the performance of your device with a few additional programs.

2. Check the SSD speed with third-party applications

Whether we have the option to test our hardware with or without additional software, you don’t have to worry, because there are many freeware applications that do the same thing. Moreover, some are even multi-platform, which makes it more convenient for all types of users.

Check SSD speed using CrystalDiskMark

For Windows users, there is a great program that you can use. CrystalDiskMarkm, using this software, you can measure the disk speed of a computer. This can be done by pressing “all” after installing the program.

Download: CrystalDiskMark for Windows (Free of charge)

For macOS, Novabench is a good program that can identify the read and write speeds of a disk on a computer. Because this is a third-party program, it is not in the App Store, but can be found on the Novabench website. Unfortunately, this is only for Intel-based processors, so those with Apple’s latest M1 chip are out of luck.

Check SSD speed using Novabench

Finally, since almost all programs on Linux are open source, it would seem strange for the platform to be based on third-party software. However, if you feel the need to use third-party software, Novabench is also available for Linux users to test their speed.

Download: Novabench for Windows | macOS | Linux (Free of charge)

3. Check the SSD speed with the multiplatform software

Check the SSD speed using AttoDiskBenchmark

For those who use multiple operating systems, the ATTO Disk Benchmark is cross-platform. Technically, it’s free, although there is a paid version that gives you access to more features. However, this program offers the ability to compare different hardware components on your computer, in addition to just reading the speed of the storage device.

Regardless of the operating system, you can test the speed of your SSD very easily. To run the test, click start in the middle of the program. In the drop-down menu there are several parameters that can be changed according to your wishes and your hardware. Then, as shown above, the desired information will be displayed.

Download: AttoDiskBenchmark for Windows | macOS (Free)

What to do if you have a slow drive?

As technology advances, the technology on your computer will become obsolete. Fortunately, many obsolete parts can be replaced with newer components, resulting in better performance. While increasing memory can improve responsiveness, upgrading an SSD can drastically change your computer’s performance.

Typical SSD speeds range from 300 to 600 MB / s for read and write speeds. In some cases, you will get more benefits from upgrading your memory than upgrading an SSD. The advantage is the minimal upgrade from SSD to SSD, especially since it is already fast. But from the old HDD to the SSD, you will definitely feel the difference, as well as when you upgrade from the old standard PCIe to the new generation.

Upgrading a storage device to an SSD is a fairly easy task. Decide if you want to use NVMe or SSD, but make sure it can be supported on your device. Not all computers or laptops allow the use of NVMe drives due to lack of available ports. Once you have selected the desired device, you need to transfer data from the original SSD to the new one.

Read also: What is an M.2 SSD? Here’s the explanation

Conclusion

Here’s how to check SSD speed on a laptop or PC and various operating systems. As the price of computer parts becomes more and more expensive nowadays, updating the main components can no longer be done cheaply. One of the cheapest components to upgrade is the storage device.

SSDs can be found at the cheapest prices in the range of 300-400 thousand, depending on the size of the desired storage space. As mentioned above, disk speed testing is a fairly simple process and can be done with or without internet access for most operating systems. With a variety of built-in or third-party software, you can obtain unit information.


So many articles 3 Ways to Check SSD Speed ​​on a Laptop or PC. Looking forward to more interesting articles and don’t forget to share this article with your friends. Thanks…

Leave a Comment

/* */